dlinkrouter.local setup wizard
Here’s how you can access dlinkrouter.local login page
Accessing the http dlinkrouter.local setup wizard does not have to be a hassle. If you are wondering how to proceed with the same, the information on this page is what you need. From setting up the device to making the physical wired connections and accessing the login page, we have shared the complete information so you can proceed with the D-Link router setup easily.
D-Link Extender FEATURES
- You can use Wi-Fi Protected Setup (WPS) on the D-Link DAP1650 to create a secure connection to new devices in seconds by easily pushing a button or entering a PIN. There is WPA/WPA2 security encryption which allows you to change your network security.
- The D-Link DAP-1650 extender’s internet-based configuration lets you control what information is reachable to those on the wireless network whether from the Internet or from your company’s server.
- Then D-Link DAP-1650 can be used as an Extender, Access Point or Media Bridge which means that you can change its operation to suit your networking requirements.
- Now the D-Link DAP-1650 Extender has built-in Gigabit Ethernet ports facilitating a wired connection of up to 1 Gbps which means that wired devices can take benefit of the D-Link DAP-1650’s high-speed wireless capabilities.
- The D-Link DAP-1650 extender is compatible with the 802.11n/g/ standards, so it can connect with existing wireless adapters found on older wireless devices.
Accessing the dlinkrouter.local setup wizard
The D-Link router setup process starts as soon as you unbox the contents. If your router comes with detachable antennas, you will need to fix them on the main machine in their designated slots.
When you are done, proceed with making the hard-wire connections.
- Connect your router to the MODEM using an Ethernet cable. Also, connect your router to the computer system using another Ethernet cable.
- Connect the main MODEM to the DSL internet line and connect the router to a power adapter and switch it on.
- Wait for the lights on the router to go solid. Once this state is achieved, you can access your computer system.
- Open a web browser and in the address bar, type http://dlinkrouter.local and press Enter. This will redirect you to the dlinkrouter.local setup wizard.
- On the home page, you will be asked to enter the username and password to proceed with the setup.
- The username will be with the name of D-Link and some numbers, whereas you can use the word “password” in the admin password field.
- Once entered, click on the Login button and you will reach the dlinkrouter.local login window.
- The router will search for the internet connection and the dlinkrouter.local setup wizard will walk you through the entire process.
- Now, under the Wireless section in Wireless Settings tab, you can change the network SSID and the password. These details will act as your network SSID and the network security key.
- Once you are done updating the same, you can click on the Apply Changes button to save the settings.
The D-Link router setup process is now complete and you can begin using uninterrupted internet.
Answers to some FAQs
Why am I not able to access http://dlinkrouter.local page?
The issue with accessing this web-based configuration utility can be due to typographical errors. Make sure that you are entering the correct web address. The correct address is http://dlinkrouter.local.
If you are still unable to access the same, you can try using the default IP address i.e. 192.168.0.1 in the address bar while being connected to your router network.
Also, make sure you are entering the correct Wi-Fi admin username and password as given on the label or the user manual.
I am not able to access the internet. What should I do?
If you are using a MODEM/router combination, ensure that your MODEM is working/ switched ON. Also, make sure the Ethernet Cable is attached securely and is not loose.
Check if the internet LED is lit on the router panel. If everything is working, and you are still unable to access the internet, try power cycling your devices. This will fix the issue for sure.
How can I RESET my router to default factory settings?
In order to reset the router, you will need to locate the RESET button on the rear panel. Once located, you can use a thin object like a paper clip to press the same for about 3-5 seconds. Release the button when the router reboots itself. You may need to follow the setup process again. You can do it by following the information shared above.
How do I change my Wi-Fi password?
You can do it in two ways. Using the http://dlinkrouter.local login page and using mydlink web portal.
#1 Using dlinkrouter.local login page
- Using http dlinkrouter local, you can follow the common login process and then from the main dashboard click on the Setup tab.
- You will see the Wireless Settings tab on the left side. Click on it.
- Select the “manual wireless network setup” tab.
- Scroll down to find the Wireless Security Mode tab.
- You’ll see the option to change the password.
- Enter the old password and then the new password and the new password once again to confirm and click on the Save button.
Your password is now changed.
#2 Using mydlink web portal
- Open the web browser and enter https://eu.mydlink.com in the address bar.
- Using your current login credentials, log into the portal.
- From the “My Devices” tab, select “Router” and then go to “Settings”.
- Under the “Settings” tab on the main dashboard, select Basic Settings to change your password.
- Once done, click on the Apply button. On the confirmation pane that appears, click on the Yes button to save the changes.
Your password is now changed.